The KNL5040TBA aerial ladder truck has a maximum operating height of 32 meters (about 11 floors), and a rated load capacity of 400kg. It has the characteristics of easy operation, strong flexibility, high work efficiency, and wide application. It can be widely used in high-altitude transportation, project leasing, curtain wall construction, roof solar energy, roof waterproofing, advertising anti-aircraft guns, power maintenance, air-conditioning outdoor unit installation, ship maintenance, high-altitude moving, cement and sand handling, road and bridge repairs, etc. .
● It adopts JMC National VI chassis with low failure rate and high reliability. It can be driven with a blue plate and a C1 driver's license. It is exempt from purchase tax and does not require an operation certificate. It is a non-operating vehicle and has a service life of 30 years.
● The ladder arm is imported from South Korea, and the ladder frame is made of aviation 7108 aluminum alloy structure, which has high strength, fatigue resistance and metal memory.
● The use of alloy steel wire rope has large bearing capacity, high wear resistance, small deformation and long service life.
● The shelf trolley adopts two safety methods to prevent falling, which are L-shaped bolt device and double sawtooth device.
● The two-stage trolley structure is adopted, and the minimum ground clearance of the shelf can reach 45cm. The rollers of the shelf trolley adopt a shock-absorbing structure to ensure that the trolley runs smoothly during work.
● Wireless remote control self-unloading and turning, clean discharge and high work efficiency.
● The radiator automatically senses temperature and dissipates heat automatically, reducing loss and increasing the service life of the hydraulic system.
● The whole vehicle has a high degree of intelligence, equipped with one-button start and stop of the engine, up and down positioning and automatic learning of the handling trolley, electronic control ratio and automatic engine speed regulation, online detection and other technologies.
● Schematic diagram of the scope of work
● Work scene
Category | Project | Parameter |
Vehicle parameters | Dimensions（L×W×H） | 5995×1900×2970 |
Total mass（kg） | 4495 | |
Curb weight（kg） | 4170 | |
Number of passengers | 2+3 | |
Driving parameters | Engine power（kw） | 85 |
Wheelbase（mm） | 3360 | |
Tire specifications | 7.00R16LT 10PR | |
Top speed（km/h） | 100 | |
Main operating parameters | Working platform rated load（kg） | 400 |
Working height（m） | 32 | |
Horizontal/vertical span（mm） | 3760/3160 | |
Hoist lifting time（s） | 30 | |
Rotation angle | ±90 | |
Main configuration | Chassis | JMC Shunda JX1041TG26 |
Ladder arm | Korean ladder frame, seven-section synchronous expansion and contraction | |
Hydraulic system | Import of core hydraulic parts | |
Electronic control system | Electric proportional control, adjustable speed |
