1、Main oil pump
The joint venture brand constant power variable plunger pump or Kawasaki main oil pump is adopted. The constant power control can effectively prevent the motor and diesel engine from being overloaded, and bear higher pressure and load than conventional gear pumps.
2、Power system
The motor fine stone pump adopts domestic and foreign well-known brands of Yantai Motor and Siemens Beide Motor, and the diesel engine fine stone pump adopts Tianjin Lovol and Yuchai brands with low energy consumption and high efficiency.
3、Hopper device
Increase the volume of the hopper and equip the fence with a vibrating motor to meet the requirements of pumping fine stone concrete.
4、Electronic control system
The main electrical appliances adopt Schneider, LS brand, Chint
5、Cooling system
The air-cooled or water-cooled dual cooling system is not only suitable for high-temperature climates, but also suitable for severe cold climates. It can effectively control the oil temperature of the hydraulic system and ensure the safety and reliability of equipment operation.
6、Six point lubrication system
The lubricant is lubricated "point-to-point" by the lubrication pump to protect key components from wear.
7、S pipe valve
The S pipe valve is integrally cast with high manganese steel, and the wear-resistant surface is surfacing with wear-resistant materials, which has the advantages of high pressure resistance and wear resistance; the transition of the inner cavity is smooth, the concrete flows smoothly inside, and the pumping performance is further improved; The key shaft is made of alloy material for special surface treatment, which improves wear resistance and fatigue strength.
8、Spectacle plate, cutting ring
The spectacle plate and cutting ring are made of hard alloy inlays, which are durable.
9、Hydraulic line connector
Rubber hoses are provided by Afaigma in Italy or Gates in the United States.
10、Wireless remote
Adopt wireless remote control imported from Taiwan, easy to operate
| 参数名称 | 单位 | HBX50 -11-55 |
| 最大理论排量 | m³/h | 50 |
| 最大理论输送压力 | Mpa | 11 |
| 输送缸规格X行程 | mm | φ180 X 1000 |
| 出料口直径 | mm | Φ150 |
| 主电机功率 | kw | 55 |
| 主油泵 | L/r | 112 |
| 允许最大骨料粒径 | mm | 30 |
| 输送管内径 | mm | Φ80/100/125 |
| 外形尺寸(长×宽×高) | mm | 4500×1500×1550 |
| 主机质量 | kg | 2600 |
| 拖行速度 | km/h | ≤8 |
| 最大理论输送距离 | M | 水平 200 |
| M | 垂直 90 |
